Waste Water Treatment Chemicals Decolorizing and COD Reduction liquid CW-08

Waste Water Treatment Chemicals Decolorizing and COD Reduction liquid CW-08

Specifications:

Application method and notes:
1. The product shall be diluted with 10-40 times water, then added to the wastewater directly. After stirring for several minutes, the clear water will be got by precipitation or air-floatation.
2. The optimized pH of the wastewater accepted is 6-10.
3. It is recommended to use this product with the inorganic flocculants to treat the effluent with high color and COD to reduce the operation cost. The order and proportion of agent dosage depend on the flocculation test and the effluent treatment process.4. The product is nonflammable and unexplosive.
5. The product would show layer separation and become white at low temperature. There is no negative impact on the usage after mixing up.

Package and Storage:
1. It is harmless, non-flammable and non-explosive, it can not be placed in the sun.
2. It is packed in plastic drums with each containing 30kg, 50kg, 250kg ,1000kg, 1250kg IBC tankor others according to your requirements.
3. This product will appear layer after a long-term storage, but the effect will not be affected with stir. Storage temperature: 5-30°C

Advantage:
1.Strong decolorization
2.COD remove better(about 60%)
3.Faster sedimentation, better flocculation
4.Non-pollution(no aluminum, chlorine, heavy metal ions ect.)

decoloring agent water treatment

Water purifying agents

Waste Water Treatment Chemicals Decolorizing and COD Reduction liquid CW-08 Images